Standard models 1 & 2 are fitted with an electric lamp to assist the
operator, which automatically comes on when the machine is connected
to the electrical supply.
The Microwelder is fitted with a wire cutter to ensure the wire ends are
square.
The movement of the electrodes/jaws is controlled by enclosed parallel guides
which ensure that the finest and heaviest wires are welded in alignment.
One set of standard electrodes/jaws cover the complete welding capacity of
the machine.
Pressure regulating control is done by marked graduations on an
adjusting screw.
Spacing electrodes is done by operating the Eccentric lever marked for
different wire gauges.
Regulation of the welding or annealing current by means of a 6-step heat
switch.
Contact button & automatic circuit breaker are combined in a simply
constructed unit. The contacts consist of tungsten pins and will operate
for many years.
email:
admin@rymerengineering.info
:Telephone: +44 (0) 1535 665335:
RYMER ENGINEERING:www.microwelder.co.uk:www.rymereng.co.uk
Heber Street Works, Keighley, West Yorkshire, BD21 5JU, ENGLAND.
Manufacturers of Wire Resistance Butt Welders.
